Colorado 4WD L4-2.9L (2008)
3. Remove the ignition coil bolts.
4. Remove the ignition coils from the camshaft cover.
Installation Procedure
Important: Ensure the ignition coil seals are properly seated to the camshaft cover.
1. Install the ignition coils into the camshaft cover.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the ignition coil bolts.
Tighten the bolts to 10 N.m (89 lb in).
