Colorado 4WD L4-2.9L (2008)
Notice: Refer to Fastener Notice.
1. Install the 2 bolts securing the front seat belt shoulder adjuster (3) to the vehicle.
Tighten the front seat belt shoulder adjuster bolts to 52.5 N.m (39 lb ft).
2. Install the upper center pillar trim panel (1). Refer to Center Pillar Upper Trim Panel Replacement (See: Body and Frame/Interior Moulding /
Trim/Trim Panel/Service and Repair) .
3. Install the knob (2) on the front seat belt shoulder adjuster (3).
4. Install the front seat belt upper guide with the bolt. Ensure that the seat belt webbing is not twisted.
Tighten the front seat belt upper guide bolt to 52.5 N.m (39 lb ft).
5. Install the front seat belt upper guide shoulder bolt trim cover.
