Colorado 4WD L4-2.9L (2008)
Positive: Service and Repair
Battery Positive and Negative Cable Replacement
Important:
*
Always use replacement cables that are of the same type, diameter and length of the cables that are being replaced.
*
Always route the replacement cable the same way as the original cable.
Removal Procedure
1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Negative/Service and Repair) .
2. Open the protective cover to access the positive battery cable terminal.
3. Loosen the positive battery cable nut (3).
4. Remove the positive battery cable (4) from the battery.
5. Disconnect the engine wiring harness electrical connector (1) from the generator battery control module.
6. Remove the engine wiring harness clip (2) from the upper battery box.
