Colorado 4WD L4-2.9L (2008)
Clutch Slave Cylinder: Service and Repair
Clutch Actuator Cylinder Replacement
Removal Procedure
1. Remove the transmission. Refer to Transmission Replacement (RWD) ()Transmission Replacement (4WD) (See: Manual
Transmission/Transaxle/Service and Repair/Removal and Replacement/Transmission Replacement (4WD)) .
2. Remove the 2 clutch actuator cylinder bolts (3).
3. Remove the clutch actuator cylinder (1) from the input shaft bearing retainer (2).
Installation Procedure
1. Position the clutch actuator cylinder (1) to the input shaft bearing retainer (2).
