Colorado 4WD L4-2.9L (2008)
12. Install the front propeller shaft. Refer to Front Propeller Shaft Replacement (See: Drive/Propeller Shafts, Bearings and Joints/Drive/Propeller
Shaft/Service and Repair/Front Propeller Shaft Replacement) .
13. Install the EPS. Refer to Engine Protection Shield Replacement (See: Body and Frame/Frame/Skid Plate/Service and Repair) .
14. Install the brake calipers. Refer to Brake Caliper Replacement (See: Brakes and Traction Control/Disc Brake System/Brake Caliper/Service and
Repair/Removal and Replacement/Brake Caliper Replacement) .
15. Inspect the axle lubricant level, and add, if necessary. Refer to Front Axle Lubricant Replacement (See: Fluid - Differential/Service and
Repair/Removal and Replacement/Front Drive Axle) .
16. Lower the vehicle.
Differential Carrier Assembly Cover and/or Gasket Replacement
Differential Carrier Assembly Cover and/or Gasket Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair) .
2. Remove the engine protection shield (EPS), if equipped. Refer to Engine Protection Shield Replacement (See: Body and Frame/Frame/Skid
Plate/Service and Repair) .
3. Drain the front differential assembly.