Colorado 4WD L4-2.9L (2008)
Input Shaft: Service and Repair
Transmission Input Shaft Bearing Retainer Replacement
Removal Procedure
1. Drain the transmission fluid. Refer to Transmission Fluid Replacement (See: Service and Repair/Removal and Replacement/Transmission Fluid
Replacement) .
2. Remove the clutch actuator cylinder. Refer to Clutch Actuator Cylinder Replacement (See: Clutch/Clutch Hydraulic System/Clutch Slave
Cylinder/Service and Repair) .
3. Remove the input shaft bearing retainer bolts.
Discard the bolts.
4. Remove the input shaft bearing retainer.
5. Clean and inspect the input shaft bearing retainer. Refer to Transmission Case Cleaning and Inspection (See: Service and
Repair/Overhaul/Cleaning and Inspection/Transmission Case Cleaning and Inspection) .
Installation Procedure