Colorado 4WD L4-2.9L (2008)
Windshield Washer Pump: Service and Repair
Washer Pump Replacement (2nd Design)
Removal Procedure
1. Raise and support the hood.
2. Remove the washer solvent container. Refer to Windshield Washer Solvent Container Replacement (2nd Design) (See: Windshield Washer
Reservoir/Service and Repair) .
3. Pull the top of the pump outward in order to release the pump from the container.
4. Using 2 flat-bladed tools under the pump, gently pry in opposite directions in order to release the pump from the grommet.
5. Remove the washer pump (1) from the washer container.
6. Discard the washer pump grommet.
Installation Procedure