Colorado 4WD L5-3.5L VIN 6 (2005)
11.
Install rivets as seen in illustration above.
12.
Install the trim panel to the door.
13.
Install the electrical connectors to the switch if equipped.
14.
Install the switch plate assembly.
15.
Install the two screws that secure the assembly to the door.
Tighten
Tighten the screws to 2 N.m (18 lb in).
16.
Install the door handle bezel.
17.
Install the screws.
Tighten
Tighten the front door handle bezel screws to 2 N.m (18 lb in).
18.
Install the window regulator handle.
Parts Information
Warranty Information