Colorado 4WD L5-3.5L VIN 6 (2005)
1. Install the 3 bolts (1) securing the cupholder bracket to the seat frame.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the cupholder bracket bolts to 9.1 N.m (80 lb in).
2. Install the cupholder to the seat by pushing it straight onto the bracket.
3. Install the seat in the vehicle.
Cupholder Replacement - Rear Seat (Crew Cab)
CUPHOLDER REPLACEMENT - REAR SEAT (CREW CAB)
REMOVAL PROCEDURE