Colorado 4WD L5-3.5L VIN 6 (2005)
4. Remove the rear shoulder belt guide.
5. Grasp the lower edge of the body rear trim panel and pull to release the fasteners from the sheet metal.
6. Raise the panel to unhook it from the sheet metal along the lower edge of the rear window.
7. Remove any fasteners that may have pulled away from the panel and reinstall them to the back of the panel.
8. Remove the body rear trim panel from the vehicle.
INSTALLATION PROCEDURE
1. Hook the body rear trim panel in the sheet metal along the lower edge of the rear window.
