Colorado 4WD L5-3.5L VIN 6 (2005)
20. Remove the seat cushion frame.
Installation Procedure
1. Install the seat cushion frame to the seat adjuster with 4 nuts (1).
Notice: Refer to Fastener Notice in Service Precautions.
Tighten the front seat cushion frame mounting nuts to 24 N.m (18 lb ft).
2. Route the wire harness for the lumbar and seat heat switches through the hole in the seat cushion frame and connect the connectors.
3. Install the assist spring.
4. Install the seat cushion foam pad and cover to the frame.
5. Install the seat belt buckle assembly (1) through the seat cushion pad.
6. Install the seat belt buckle assembly (1) to the seat adjuster with the bolt (2).
Tighten the front seat belt buckle bolt to 55 N.m (41 lb ft).
