Colorado 4WD L5-3.5L VIN 6 (2005)
1. Install the switches (2, 5) to the switch plate (1).
2. Connect the electrical connectors (3, 4) to the switches (2, 5).
3. Install the switch plate assembly to the door trim panel with the 2 screws.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the front door switch plate screws to 2 N.m (18 lb in).
Power Door Lock Switch Replacement - Rear
POWER DOOR LOCK SWITCH REPLACEMENT - REAR
REMOVAL PROCEDURE