Colorado 4WD L5-3.5L VIN 6 (2005)
4. Remove the wheel hub/speed sensor assembly. Refer to Wheel Hub/Speed Sensor Replacement See: Maintenance/Wheels and Tires/Wheel
Hub/Service and Repair.
Important: In the following service procedure, support the wheel hub/brake rotor assembly with wood when working on the bench.
5. Using 2 pieces of wood, support the wheel hub/brake rotor assembly.
6. Remove the wheel hub/speed sensor to brake rotor bolts.
7. Separate the brake rotor from the wheel bearing/hub assembly.
8. Clean the surface between the wheel bearing/hub assembly and the brake rotor.
Installation Procedure
Important: Whenever the brake rotor has been separated from the hub/axle flange, any rust or contaminants should be cleaned from the hub/axle
