Colorado 4WD L5-3.5L VIN 6 (2005)
11. Hold the lock tab in place.
Important Pushing forward on the park brake cable will unlock the cable from the retainer allowing the cable to be removed from the park brake
lever.
12. Push the park brake cable forward.
Important When removing the park brake cable from the lever, the park brake return spring will remain attached to the lever. DO NOT remove the
return spring from the lever. If the return spring becomes separated from the lever, replace the rear brake shoes. The lever is part of the brake shoe
assembly.
13. Remove the park brake cable from the lever.
Installation Procedure
1. Apply a small amount of high temperature silicone grease or equivalent to the contact areas between the rear brake shoes and the backing plate.
