Engine Mount Replacement - Left for Colorado 4WD L5-35L VIN 6 (2005)
1. Install the engine mount. You will need to articulate the mount in order to install the mount.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the engine mount bolts.
3. To aid in the installation of the bolts, start a bolt in position (1) first.
^
Tighten the engine mount bolts to 50 Nm (37 ft. lbs.).
4. Lower the engine.
5. Install the engine mount-to-frame bracket through bolt.
^
Tighten both of the engine mount-to-frame bracket bolts to 85 Nm (63 ft. lbs.).
6. Install the engine coolant pipe bracket bolt from the engine mount.
7. Remove the jack stand.
8. Install the lower intermediate steering shaft.
