Colorado 4WD L5-3.5L VIN 6 (2005)
1. Install the temperature cable (4).
2. Install the temperature control cable (9) to the temperature actuator cam (10).
3. Install the temperature cable to the retaining clip.
4. Install the temperature cable (4) to the temperature control cam (5).
5. Install the temperature cable (4) to the retaining clip.
6. Install the mounting screws to the HVAC control assembly.
Tighten the screws to 1.9 N.m (17 lb in)
NOTE: Refer to Fastener Notice in Service Precautions.
7. Install the accessory trim plate.