Colorado 4WD L5-3.5L VIN 6 (2005)
2. Using the J 45861 (4) carefully install the ECT sensor (3) into the cylinder head (5).
NOTE: Refer to Component Fastener Tightening Notice in Service Precautions.
Tighten the ECT sensor to 14 N.m (124 lb in).
3. Connect the ECT sensor electrical connector (2) to the following:
-
The engine wiring harness
-
The camshaft cover (1)
4. Fill the engine coolant. Refer to Draining and Filling Cooling System in Cooling System.