chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Roof Rail Module Replacement - Front (Regular and Extended Cab)|Page 7815 > < Roof Rail Module Replacement - Front (Regular and Extended Cab)
Page 2
background image

1. Install the 3 bolts (1) retaining the roof rail air bag module to the roof.

Tighten the roof rail air bag module bolts to 9 N.m (79 lb in).

NOTE:  Refer to Fastener Notice in Service Precautions.

2. Install a new forward curtain clip (2).
3. Install the bolt (5) retaining the rear curtain to the roof.

Tighten the roof rail air bag curtain bolts to 9 N.m (79 lb in).

4. Install the rear tether bolt (3).

Tighten the roof rail air bag rear tether bolt to 9 N.m (79 lb in).

5. Install the clips (3) to the pillar.
6. Install the roof rail air bag forward tether bolt (3).

Tighten the roof rail air bag forward tether bolt to 9 N.m (79 lb in).

7. Connect the roof rail air bag electrical connector (1).
8. Install the headliner.
9. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 2 and SIR Disabling and Enabling Zone 6.

10. Install the head restraints from the front seats.

Roof Rail Module Replacement - Front (Regular and Extended Cab)|Page 7815 > < Roof Rail Module Replacement - Front (Regular and Extended Cab)