Colorado 4WD L5-3.5L VIN 6 (2005)
12. Remove the trim panel.
13. Remove the CPA from the seat belt pretensioner - left connector.
14. Disconnect the seat belt pretensioner - left connector from the vehicle harness connector.
15. Remove the garnish molding.
16. Disconnect the roof rail module connector (1) from the vehicle harness.
17. Remove the CPA from the I/P module yellow 4-way inline connector C208 (2) located above the driver side kick panel.
18. Disconnect the I/P module yellow 4-way inline connector C208 (2) located above the driver side kick panel.
19. Remove the left door trim panel.
