Colorado 4WD L5-3.5L VIN 6 (2005)
7. Connect the side impact sensor yellow 2-way connector (5) located near the middle of the door.
8. Install the CPA (3) to the side impact sensor yellow 2-way connector (5) located near the middle of the door.
9. Install the left door trim panel.
10. Connect the I/P module yellow 4-way inline connector C208 (2) located above the driver door kick panel.
11. Install the CPA to the I/P module yellow 4-way inline connector C208 (2) located above the driver side kick panel.
12. Connect the roof rail module connector (1) and install the garnish molding.