Colorado 4WD L5-3.5L VIN 6 (2005)
^
Torque the large retaining clamp to 176 Nm (130 ft. lbs.).
10. Check the gap dimension on the clamp ear.
11. Angulate the CN joint several times to disperse the grease.
12. Install the inner seal.
^
Torque the large retaining clamp to 176 Nm (130 ft. lbs.).
10. Check the gap dimension on the clamp ear.
11. Angulate the CN joint several times to disperse the grease.
12. Install the inner seal.