Colorado 4WD L5-3.5L VIN 6 (2005)
Gear Sensor/Switch: Service and Repair
Transfer Case 2/4 Indicator Switch Replacement
Transfer Case 2/4 Indicator Switch Replacement
Removal Procedure
1. Raise and support the vehicle.
2. Disconnect the gray engine wiring harness electrical connector (2) from the gray 2/4 indicator switch electrical connector (4).
3. Disconnect the gray 2/4 indicator switch electrical connector (2) from the bracket (1).
4. Loosen the switch connector bracket bolt in order to release the 2/4 indicator switch pigtail.
5. Remove the transfer case 2/4 indicator switch (4) and gasket (3) from the transfer case.
Installation Procedure