Colorado 4WD L5-3.5L VIN 6 (2005)
Seals and Gaskets: Service and Repair
Transfer Case Input Shaft Seal Replacement
Transfer Case Input Shaft Seal Replacement
^
Tools Required
-
J 3289-20 Holding Fixture
-
J 23907 Slide Hammer with Bearing Adapter
-
J 45278 Seal Remover
-
J 45759 Assembly Fixture
-
J 45934 Input Seal Installer
Removal Procedure
1. Remove the transfer case assembly.
2. Install the J 45759 to the transfer case, using 4 suitable bolts.
3. Mount the J 3289-20 (1) to a sturdy workbench.
4. Install the J 45759 (2), with the transfer case, into the J 3289-20 (1) and secure with the pivot pin.