chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Vehicle - Recreational (Dinghy) Towing Information|Page 14177 > < Vehicle - Recreational (Dinghy) Towing Information|Page 14175
Page 3
background image

Note:

The vehicles shown must not be towed backwards or transmission damage may occur.

Towing Procedure

Note:

Failure to follow these instructions may result in damage to the transmission.

Important:

The towing speed as stated in the Owner's Manual should not exceed 104 km/h (65 mph) for 1995-2005 vehicles.

In order to properly dinghy tow the vehicle, follow these steps:

1.

Firmly set the parking brake.

2.

Open the fuse panel and pull the fuse(s) indicated in the Owner's Manual section detailing towing your vehicle. This prevents the instrument panel
(IP) and/or electronic PRNDL indicator from draining the battery.

3.

Securely attach the vehicle to the tow vehicle.

4.

Turn the ignition key to the OFF position, which is one position forward of LOCK. Unlocking the steering column allows for proper movement of
the front wheels and tires during towing.

For 1997-1999 Cutlass, 1997-2003 Malibu, 2004-2006 Chevrolet Classic and 1999-2004 Alero/Grand Am models, turn the ignition switch to the
accessory (ACC) position, which is one position forward of OFF. This position unlocks the transaxle.

5.

Shift the transmission to Neutral (N).

Note:

Vehicle - Recreational (Dinghy) Towing Information|Page 14177 > < Vehicle - Recreational (Dinghy) Towing Information|Page 14175