Colorado 4WD L5-3.7L (2007)
2. Position the window regulator to the inner panel by sliding the regulator bolts (1) into the keyhole slots in the inner panel.
3. NOTE: Refer to Fastener Notice.
Install the fastener retaining the front door window regulator to the door.
Tighten the front window regulator fasteners to 9 N.m (80 lb in).
4. Connect the electrical connector to the window regulator motor, if equipped with A31.
5. Install the front door window.
6. Install the bolts retaining the window to the window regulator.
Tighten the front door window bolts to 9 N.m (80 lb in).
7. Install the front door water deflector.
8. Install the front door trim panel.
