Colorado 4WD L5-3.7L (2007)
1. Install the rear side door check link to the door, ensuring the alignment mark (1) faces upward.
Notice: Refer to Fastener Notice.
2. Install the nuts retaining the rear side door check link to the door.
Tighten the rear side access check link nuts to 9 N.m (80 lb in).
3. Install the bolt retaining the rear side access check link to the body.
Tighten the rear side access check link bolt to 25 N.m (18.4 lb ft).
4. Install the rear side access door trim panel.