Colorado 4WD L5-3.7L (2007)
Tighten the rear bench seat back frame mounting bolt to 50 N.m (37 lb ft).
3. Install the seat back latch assembly.
4. Install the head restraint guides in the seat back frame by pushing the guides through the frame until the tabs lock into place.
5. Install the seat back cover and pad.
6. Install the screw securing the side trim covers to the seat cushion frame.
Tighten the rear bench seat side trim cover screw to 1.5 N.m (13 lb in).
7. Install the rear head rest restraints, if equipped.
8. Install the seat from the vehicle.
Rear Seat Back Cushion Frame Replacement (Extended Cab)
Rear Seat Back Cushion Frame Replacement (Extended Cab)
Removal Procedure
1. Remove the rear seat back from the vehicle by grasping the back and lifting straight up.
