Colorado 4WD L5-3.7L (2007)
Power Mirror Switch: Technical Service Bulletins
Interior - Door Switch Service Precautions
INFORMATION
Bulletin No.: 05-08-64-015A
Date: February 26, 2008
Subject:
Information to Avoid Damage or Breakage to Power Mirror/Window/Lock Switch Trim Plate Assembly During Removal From Door Trim
Models:
2004-2008 Chevrolet Colorado
2004-2008 GMC Canyon
Supercede:
This bulletin is being revised to add model years. Please discard Corporate Bulletin Number 05-08-64-015 (Section 08 - Body & Accessories).
When servicing any components that require the removal of the door trim panel and/or the power mirror window and door lock switch plate assembly the
following steps should be taken to avoid damaging or breaking the clip tower which holds the plate to the door panel in the front.
1.
Remove the two screws securing the switch plate assembly to the door trim panel.
2.
Lift the front of the plate up to disengage the clip.
^
If lifting the rear of the assembly first it will break the clip tower.
^
This information can be found in SI (Mirror Window And Door Lock Switch Replacement).
Disclaimer
