Colorado 4WD L5-3.7L (2007)
1. Install the lock cylinder to the endgate handle if equipped.
2. Install the endgate handle to the endgate.
3. NOTE: Refer to Fastener Notice.
Install the bolts retaining the endgate handle to the endgate.
Tighten the endgate handle bolts to 9 N.m (80 lb in).
4. Install the endgate latch rods (2) to the retaining clips (1) on the endgate handle.
5. Connect the clips (1) retaining the endgate latch rods (2) to the handle.
6. Install the endgate cover.
