Colorado 4WD L5-3.7L (2007)
Important: Align the wheel speed sensor harness with the reference mark on the wheel hub/bearing assembly.
1. Position the wheel speed sensor on the wheel hub/bearing assembly.
2. Carefully press the wheel speed sensor squarely onto the wheel hub/bearing assembly until fully seated against the lip of the wheel hub/bearing
assembly housing.
Important: Align the wheel speed sensor harness with the reference mark on the steering knuckle.
3. Install the brake rotor (2) and wheel hub/bearing assembly to the steering knuckle (3).
Notice: Refer to Fastener Notice.
4. Install the wheel hub/bearing bolts (1).
Tighten the bolts to 125 N.m (92 lb ft).
