Colorado 4WD L5-3.7L (2007)
2. Place the bleed hose of the J 34730-1A (2) into an approved gasoline container.
3. Open the bleed valve on the J 34730-1A (2) in order to bleed the fuel system pressure.
4. Place a shop towel under the fuel pressure service connection to catch any remaining fuel spillage.
5. Remove both the J 42242 (1) and the J 34730-1A (2) from the fuel pressure service connection.
6. Drain any fuel remaining in the J 34730-1A (2) into an approved gasoline container.
7. Install the cap on the fuel pressure service connection.
8. Inspect for leaks using the following procedure:
1. Turn the ignition ON, with the engine OFF for 2 seconds.
2. Turn the ignition OFF, for 10 seconds.
3. Turn the ignition ON, with the engine OFF for 2 seconds.
4. Turn the ignition OFF.
5. Inspect for leaks.
