Colorado 4WD L5-3.7L (2007)
1. Apply coolant to the end of the heater inlet hose (5).
Important: When installing a new heater inlet hose, place the clamps on the hose before installing the hose to the inlet hose fitting at the
engine block.
2. Install the heater inlet hose (3) to the inlet hose fitting (6) at the engine block.
3. Position the inlet heater hose clamp (4) at the engine block using J38185.
4. Install the heater inlet hose (3) to the heater core inlet.
5. Press the quick connect (1) onto the heater core inlet until fully seated.
6. Fill the engine cooling system. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (Vac N Fill).
