Colorado 4WD L5-3.7L (2007)
4. Remove the evaporator tube from the retaining clips (1) on the fender.
5. Remove the grille.
6. Remove the evaporator tube retaining clip from the condenser.
7. Remove the evaporator tube attaching bolt (1) at the receiver dehydrator.
8. Remove the evaporator tube.
9. Remove the O-ring seal and discard.
Installation Procedure
1. Install the new O-ring seal.
2. Install the evaporator tube.
Notice: Refer to Fastener Notice.
3. Install the bolt (1) to the receiver dehydrator.
