Colorado 4WD L5-3.7L (2007)
Oil Filter: Service and Repair
Engine Oil and Oil Filter Replacement
Removal Procedure
1. Remove the oil fill cap.
2. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
3. Clean any dirt and/or debris away from the oil pan drain plug area.
4. Position a suitable drain pan under the oil pan drain plug.
5. Remove the oil pan drain plug.
6. Allow the oil to drain completely.
7. Clean and inspect the oil pan drain plug, replace if necessary.
8. Clean and inspect the oil pan drain plug hole and reinstall the oil pan drain plug until snug.
9. Wipe and remaining oil from the drain plug hole and reinstall the oil pan drain plug until snug.
10. Position the container under the engine oil filter drain deflector.
11. Position a suitable drain pan under the oil filter.
