Colorado 4WD L5-3.7L (2007)
16. Snap the wiring harness in place on the valve body bolts. Ensure the harness loom tab is located under the TFP switch.
17. Connect the internal wiring harness electrical connectors to the following components:
*
The TFP manual valve position switch (1)
*
The 1-2 shift solenoid (2)
*
The 2-3 shift solenoid (3)
*
The pressure control solenoid (4)
*
The TCC/PWM solenoid (5)
*
The 3-2 shift solenoid (6)
18. Install the transmission filter and oil pan.
Important: It is recommended that transmission adaptive pressure (TAP) information be reset.
Resetting the TAP values using a scan tool will erase all learned values in all cells. As a result, The ECM, PCM or TCM will need to
relearn TAP values. Transmission performance may be affected as new TAP values are learned.
19. Reset the TAP values. Refer to Transmission Adaptive Functions.
