Colorado 4WD L5-3.7L (2007)
7. Partially Install the 2 lower fasteners retaining the PSIR module to the I/P structure.
8. Install the 2 side retaining nuts (1) to the PSIR inflator module.
Tighten the 4 PSIR fasteners until fully driven, seated and not stripped.
9. Install the digital radio receiver, if equipped.
10. Install the radio.
11. Install the I/P accessory trim panel.
12. Install the right air outlet.
13. Install the right access cover to the I/P end cap.
14. Enable the SIR System. Refer to SIR Disabling and Enabling.
15. Install the I/P compartment door.
