Colorado 4WD L5-3.7L (2007)
Tighten the seat belt retractor/pretensioner bolt to 52.5 N.m (39 lb ft).
3. Connect the electrical connector to the retractor/pretensioner.
4. Install the seat belt upper guide with the bolt. Ensure that the seat belt webbing is not twisted.
Tighten the seat belt upper guide bolt to 52.5 N.m (39 lb ft).
5. Install the seat belt upper guide shoulder bolt trim cover.
6. Install the seat belt anchor bolt. Ensure that the seat belt webbing is not twisted.
Tighten the front seat belt anchor bolt to 52.5 N.m (39 lb ft).
7. Install the body rear corner trim panel.
8. Enable the SIR system. Refer to SIR Disabling and Enabling.
Seat Belt Retractor Pretensioner Replacement - Front (Crew Cab)
Seat Belt Retractor Pretensioner Replacement - Front (Crew Cab)
Removal Procedure
1. Disable the SIR system. Refer to SIR Disabling and Enabling.
2. Open the front seat belt upper guide shoulder bolt trim cover.
3. Remove the front seat belt upper guide shoulder bolt.
4. Remove the lower center pillar trim panel.
5. Remove the front seat belt anchor bolt.
6. Disconnect the electrical connector from the retractor/pretensioner.
7. Remove the bolt that retains the seat belt retractor/pretensioner assembly to the body.
8. Remove the front seat belt assembly from the vehicle.
Installation Procedure
