Colorado 4WD L5-3.7L (2007)
3. Install the CKP sensor into the engine block.
4. Add sealer GM P/N 12346004 (Canadian P/N 10953480) to the CKP sensor bolt threads.
Notice: Refer to Fastener Notice.
5. Install the CKP sensor bolt.
Tighten the CKP sensor bolt to 10 N.m (89 lb in).
6. Connect the engine wiring harness electrical connector (3) to the CKP sensor (1).
7. Lower the vehicle.
8. Perform the CKP System Variation Learn Procedure. Refer to Crankshaft Position System Variation Learn. See:
