chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

All Other Service Bulletins for Seat Occupant Sensor: > < Restraints - Loose Occupant Module
Page 2
background image

Place three pieces of tape on the back and on the edges of the inflatable restraint passenger presence System (PPS) module as shown above. Use 3M
Tape P/N 06377.

Remove the liner from the tape and firmly place the inflatable restraint passenger presence System (PPS) module under the passenger seat floor pan.

Reconnect the wire harness to the inflatable restraint passenger presence System (PPS) module.

Reinstall the seat back into place.

*We believe this source and their products to be reliable. There may be additional manufacturers of such products/material. General Motors does not
endorse indicate any preference for or assume any responsibility for the products or material from this firm or for any such items that may be available
from other sources.

Parts Information

Purchase the tape locally.

Warranty Information

For vehicles repaired under warranty, use the table.

Disclaimer

All Other Service Bulletins for Seat Occupant Sensor: > < Restraints - Loose Occupant Module