Colorado 4WD L5-3.7L (2007)
1. Position the starter motor (3) over the stud (2).
Notice: Refer to Fastener Notice.
2. Install the starter motor mounting nut (1) and bolt (4).
Tighten the bolt/nut to 50 N.m (37 lb ft).
3. Connect the battery positive cable (2) to the starter and install the starter terminal nut (1)
Tighten the nut to 9 N.m (80 lb in).
4. Connect the lead (4) to the starter solenoid and install the starter solenoid S terminal nut (3).
Tighten the nut to 3.5 N.m (31 lb in).
5. Install the intake manifold.