Colorado 4WD L5-3.7L (2007)
Steering Gear: Testing and Inspection
Rack and Pinion Steering Linkage Inspection
Tools Required
^
J 42640 Steering Column Anti-Rotation Pin
^
J 45101 Hub and Wheel Runout Gage
Left Side Steering Linkage
1. Elevate the left front of vehicle and install suitable vehicle support, maintaining contact between the right front wheel and shop floor.
2. Position the wheels in a straight-ahead position and install the J 42640.
3. Install a dial indicator between the outer tie rod and steering knuckle as shown and push inward to remove the lash slowly with one hand.
4. Place the dial indicator at zero, pull outward on the tire and note amount of movement in joint.
Movement should not exceed 1.0 mm (0.039 in).
