Colorado 4WD L5-3.7L (2007)
3. Install the TCC solenoid retaining bolts.
Tighten the TCC solenoid retaining bolts to 11 N.m (97 lb in).
4. Install the pressure control solenoid.
Ensure that the electrical connection is facing downward.
5. Install the pressure control solenoid retainer and retaining bolt.
Tighten the pressure control solenoid retaining bolt to 11 N.m (97 lb in).
6. Install the TCC PWM solenoid to the control valve body.
7. Install the TCC PWM solenoid retainer.
8. Connect the internal wiring harness electrical connectors to the following components:
^
Transmission fluid pressure switch (1)
^
1-2 shift control solenoid (2)
^
2-3 shift control solenoid (3)
^
Pressure control solenoid (4)
^
TCC PWM solenoid (5)
^
3-2 control solenoid (6)
9. Install the 1-2 accumulator. Refer to Accumulator Assembly, Spacer Plate, and Gaskets.
