Colorado 4WD L5-3.7L (2007)
Installation Procedure
1. Install a new 3-4 accumulator piston seal (1) to the 3-4 accumulator piston.
2. Install the 3-4 accumulator piston (2) onto the pin (1) in the transmission case.
Ensure that the 3-4 accumulator piston legs face away from the transmission case.
3. Install the J 25025-B (2, 3) to the transmission case.
4. Install the spacer plate to transmission case gasket and the spacer plate to valve body gasket to the spacer plate; use J 36850 in order to retain the
gaskets to the spacer plate.
-
The case gasket is identified by a C.
Be sure to place the case gasket on the transmission case side of the spacer plate.
