Colorado 4WD L5-3.7L (2007)
10. Remove the 2-4 servo from the transmission.
11. Inspect the 4th apply piston, 2-4 servo converter, 2nd apply piston, and the servo piston inner housing for the following defects.
^
Cracks
^
Scoring
^
Burrs and nicks
12. Disassemble the 2-4 servo if necessary. Refer to 2-4 Servo Disassemble.
13. Clean and inspect the 2-4 servo. Refer to 2-4 Servo Pin Length Check.
Installation Procedure
1. Assemble the 2-4 servo if previously disassembled. Refer to 2-4 Servo Assembly Installation.
2. Lightly lubricate the seals with clean transmission fluid.
3. Install new seals on the servo pistons and the servo cover.
4. Install the 2-4 servo assembly into the transmission.
5. Install the J 29714-A to the transmission oil pan flange.
6. Tighten the bolt in order to compress the servo cover.
7. Install the servo cover retaining ring.
8. Remove the J 29714-A.
Notice: Refer to Fastener Notice.
9. Install the oil pan bolt.
Tighten the oil pan bolt to 11 N.m (97 lb in).
