Colorado 4WD L5-3.7L (2007)
3. Install the J 29369-1 to the J 2619-01.
4. Using the J 29369-1 (1) and the J 2619-01 (2), remove the clutch bearing.
Installation Procedure
1. Install the J 45233 to the J 8092.
2. Using the J 45233 (1) and the J 8092 (2), install the clutch bearing.
3. Remove the inner shaft from the clamping devise.
4. Install the inner shaft. Refer to Inner Shaft and/or Housing Replacement - Front Drive Axle.