Colorado 4WD L5-3.7L (2007)
9. Remove the mounting bolts for the center bearing.
10. Remove the center bearing from the crossmember.
11. Remove the propeller shaft from the transmission.
Installation Procedure
1. Align the reference marks on the propeller shaft to the transmission.
2. Install the propeller shaft in the transmission.
3. Install the center bearing to the crossmember.
Notice: Refer to Fastener Notice.
4. Install the center bearing mounting bolts.
Tighten the center bearing mounting bolts to 80 N.m (59 lb ft).
5. Rotate the propeller shaft so that the alignment marks and the pinion yoke are in alignment.