chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 10683 > < Diagram Information and Instructions|Page 10681
Page 3
background image

11. Remove the TCC solenoid with O-ring seal, and wiring harness assembly from the transmission case.

12. Inspect the TCC solenoid and wiring harness assembly for the following defects:

^

Damage

^

Cracked connectors

^

Exposed wires

^

Loose pins

Installation Procedure

1. Install the wiring harness and TCC solenoid assembly with a new O-ring seal to the transmission.
2. Install the pass-through electrical connector to the transmission case.

Notice: Refer to Fastener Notice.

Diagram Information and Instructions|Page 10683 > < Diagram Information and Instructions|Page 10681