Colorado 4WD V8-5.3L (2010)
1. Install the latch control assembly to the rear side access door.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the bolts retaining the latch control assembly to the rear side access door.
Tighten the latch control assembly bolts to 9 Nm (80 lb in).
3. Connect the lower latch rod to the latch control assembly using the retaining clip (3).
4. Connect the upper latch rod (1) to the control assembly using the retaining clip (2).
5. Install the rear side access door latch control handle. Refer to Rear Side Access Door Inside Handle Replacement (See: Rear Door Handle/Rear
Door Interior Handle/Service and Repair/Rear Side Access Door Inside Handle Replacement).
6. Install the rear side access door trim panel. Refer to Rear Side Access Door Trim Panel Replacement (See: Rear Door Panel/Service and
Repair/Rear Side Access Door Trim Panel Replacement).
7. Close the rear side access door.
