Colorado 4WD V8-5.3L (2010)
Installation Procedure
1. Install the lower latch to the rear side access door.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the bolts retaining the lower latch to the rear side access door.
Tighten the rear side access door lower latch bolts to 9 Nm (80 lb in).
3. Install the nut retaining the lower latch to the rear side access door.
Tighten the rear side access door lower latch nut to 9 Nm (80 lb in).
4. Connect the lower latch rod (1) to the latch using the retaining clip (2), adjust the upper and lower rods to open the latches at the same time.
5. Install the rear side access door trim panel. Refer to Rear Side Access Door Trim Panel Replacement (See: Rear Door Panel/Service and