Colorado 4WD V8-5.3L (2010)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the 2 retaining screws in the switch plate. Tighten the rear door switch plate screws to 2 Nm (18 lb in).
4. Install the retaining screw in the door handle bezel. Tighten the rear door handle bezel screws to 2 Nm (18 lb in).
5. Install the window regulator handle from the door and insert the clip between the handle and the white plastic washer, if the vehicle is equipped
with manual windows.